Handwritten Notes

    Master this deck with 17 terms through effective study methods.

    Generated from uploaded handwritten-notes

    Created by @clark

    What is the recommended distance to fuse power wires from the power source?

    Fusing should occur 18 inches or less from the power source.

    Why should you disconnect the vehicle's battery before installation?

    To prevent electrical shocks and short circuits.

    What should you do if drilling through factory metal?

    Deburr and install a snap ring or grommet to protect wires.

    What is the purpose of sealing exterior drilled holes?

    To prevent unwanted liquid from entering the vehicle's interior.

    How should you handle wiring around airbags?

    Secure wiring away from deployment zones.

    What happens if you probe the wrong airbag wire?

    It can trigger airbags, causing significant damage.

    What distinguishes Class 1 from Class 2 lighting?

    Class 1 is for clearing traffic, while Class 2 is for blocking traffic.

    What are the benefits of using LEDs?

    They have a long lifespan, are durable, and are energy efficient.

    What is the function of a diode?

    It allows current to flow in one direction only.

    What do capacitors do in an electrical circuit?

    They store and release electrical energy to stabilize voltage.

    What is the role of a relay in automotive applications?

    It acts as an electro-magnetic switch for controlling circuits.

    What is Kirchhoff's Current Law?

    The total current entering a junction equals the total current leaving.

    What is the main job of an automobile battery?

    To store electrical energy and provide it to the starter motor.

    How is power measured in a DC circuit?

    Power is measured in watts, calculated as P=V x I.

    What should you do when jump starting a battery?

    Connect the positive cable to the dead battery first.

    What is a common warning when drilling for switches?

    Verify the path is clear on both sides before drilling.

    What is the minimum clearance for wiring around exhaust systems?

    At least 6 inches of clearance is required.


      Handwritten Notes Study Notes | Cramd